DFW Well Service

Need well service in Weatherford?

DFW Well Service helps property owners with water well drilling, pump service, inspections, and related well issues across North Texas.

Request Service Call (940) 536-8560
Welcome to Weatherford, TX — DFW Well Service serves Weatherford and Parker County

Water Well Drilling & Pump Repair in Weatherford, TX | DFW Well Service

Service Area Overview

DFW Well Service drills and services water wells in Weatherford, TX, reaching the Trinity aquifer through Parker County's limestone formations at 250–550 ft.

Services We Provide in Weatherford

DFW Well Service is a licensed water well contractor (TDLR License #61234 DKMPW) serving homeowners, ranchers, and businesses throughout Weatherford and Parker County.

Well Depth & Geology in Weatherford Area

Isometric geological cross-section cube illustration showing Parker County, Texas stratigraphy — Topsoil, Paluxy Formation, Glen Rose Formation, Twin Mountains Formation, and the Trinity (Paluxy / Twin Mountains) aquifer at the base.

Tap any layer in the cube — or in the list below — to see what it is and what it means for drilling a well here.

  1. Topsoil — Cross Timbers Trinity outcrop
    0–20 ft
  2. Paluxy Formation
    20–350 ft
  3. Glen Rose Formation
    350–500 ft
  4. Twin Mountains Formation
    500–700 ft
Tap or hover a layer in the cube to see what's beneath the surface here.

This cross-section shows the layer stack typical of Parker County. The exact formations and depths under a specific Weatherford-area property vary — see the details above.

Explore the full Parker County geology →

Primary Aquifer
Trinity (Paluxy / Twin Mountains)
Typical Well Depth
250–550 ft
Groundwater District
Upper Trinity GCD
Confinement
outcrop in central and western Parker County; confined beneath younger limestone in eastern Parker County

Parker County overview → Permit & regulations → TDLR License #61234 DKMPW Updated June 4, 2026

Around Weatherford, the Trinity aquifer is the water source, but it usually sits beneath hard limestone — and that limestone is what drives drilling time and cost here. Parker County sits in the Western Cross Timbers, where the Trinity sand reaches the surface in places (geologists call that an outcrop) but is more commonly buried under hard Cretaceous limestone. Expect slower drilling and higher per-foot costs through those limestone intervals than in the sandier counties to the east.

Weatherford’s position as Parker County seat means many properties are on city water, but homes and ranches on the county’s rural roads routinely depend on private wells. Limestone hardness means drill bits wear quickly, which is reflected in the per-foot pricing in this county.

Parker County Permit Requirements

All water wells drilled in Parker County must be permitted through the Upper Trinity Groundwater Conservation District (Upper Trinity GCD) in addition to meeting TDLR standards. The GCD requires a permit application, a well completion report, and adherence to setback rules from property lines, septic systems, and surface water.

For a full overview of local regulations, see our guide to Parker County water well regulations.

Ready to get started? Contact DFW Well Service at (940) 536-8560 for a free estimate on drilling, pump repair, or any well service in the Weatherford area. We’re locally familiar with Parker County’s formations and permit process, and we’ll give you a straight answer on what to expect before any work begins.

Frequently Asked Questions

How deep are water wells in Weatherford, TX?
Most residential wells in the Weatherford area reach the Trinity aquifer between 250 and 550 feet. Depth varies by location within Parker County—properties on higher limestone ridges often require deeper drilling than those in creek valleys.
Do I need a permit to drill a well in Weatherford?
Yes. In Parker County, water well permits are required through both the Texas Department of Licensing and Regulation (TDLR) and the Upper Trinity Groundwater Conservation District. We handle all permit applications as part of our drilling service.
What does it cost to drill a water well near Weatherford?
Drilling costs in Parker County typically run $48–$65 per foot due to the hard limestone formations. Around Weatherford, wells may complete in the shallower Paluxy or reach the deeper Twin Mountains producer near 500–700 feet. A shallow 350-foot completion runs roughly $16,800–$22,750 for drilling alone; wells that must reach the Twin Mountains cost more. Casing, pump, pressure tank, and electrical work are additional.
How long does it take to drill a well in Parker County?
Most residential wells in the Weatherford area are completed in 2–4 days of drilling, depending on depth and formation hardness. Site prep, permitting, and pump installation add additional time.
What aquifer does Weatherford rely on?
Weatherford and most of Parker County draw from the Trinity aquifer, primarily through the Glen Rose and Paluxy formations. This aquifer provides reliable yields for residential and agricultural use when properly completed.
Can you repair or replace my existing pump in Weatherford?
Yes. We service and replace submersible pumps, jet pumps, pressure tanks, and all well system components throughout the Weatherford area. Same-week service is often available for pump failures.
Is the well water in Weatherford salty or brackish?
Mostly fresh. The Trinity water that supplies Weatherford-area wells is generally fresh, but the Texas Water Development Board's brackish-water mapping found scattered pockets of slightly salty water in the deep Twin Mountains sand — even in shallower western Parker County — so a total-dissolved-solids test (a measure of how mineral-heavy the water is) is worth budgeting on any deeper well.

Request Service

Tell us about the property and what you need help with.

Fields marked * are required.